ISO-TOP FLEX-ADHESIVE

ISO-Top-Flexkleber

Product description		Product advantages
ISO-TOP FLEX-ADHESIVES are high quality sealants and adhesives, with a wide adhesive spectrum.		ISO-TOP FLEX-ADHESIVES are suitable for air- impermeable connections in accordance with the application examples of DIN 4108-7 Makes an air-impermeable connection between foil and building structures (masonry work, concrete, stone, plaster and anodised aluminium) possible Very good bond to all commercial window connection foils Air-impermeable finish on openings DIN standardised quality and regulatory controls from external institutions
Applications
They are suitable, in accordance to DIN 4108-7, for a reliable, air-impermeable bonding on window connect- ions foils. ISO-TOP FLEX-ADHESIVES are specially designed reliable bonding agents for window connections foils, fleece and paper in building constructions, providing an air-impermeable connection to masonry work.
Service
Standard sizes available from stock Competent experienced technical support available in the field and by phone

Packaging
ISO-TOP FLEX-ADHESIVE SP: carton of 12 tubes (600 ml) ISO-TOP FLEX-ADHESIVE SP+: carton of 20 tubes (600 ml) ISO-TOP FLEX-ADHESIVE XP: carton of 12 tubes (600 ml) ISO-TOP FLEX-ADHESIVE PA: carton of 12 tubes (600 ml)

Technical data
ISO-TOP FLEX-ADHESIVE	XP	SP	SP+	PA
Material description	soft elastic special polymer
Colour	black	white	grey	light blue
Base	MS polymer, solvent- and fungicide-free	1-K-acrylate dispersion, solvent- and fungicide-free	modified spetsial polymer, solvent, fungicide-free	acrylate dispersion
Consistence	paste
Density	1,5 g/ml	1,7 g/ml	1,4 g/ml	1,2 g/ml
Handling temperature: ambient temperature bonding surface temperature	+0°C to +40°C +0°C to +35°C	+5°C to +40°C +5°C to +35°C	-5°C to +40°C -5°C to +40°C	+5°C to +40°C +5°C to +40°C
Curing process	polymerisation through humidity at room temperature	physical drying	absorption of humidity; at temperatures below +5 °C curing is delayed	physical drying
Temperature stability	-40°C to +90°C	-20°C to +80°C	-30°C to +80°C	-40°C to +100°C
Skin forming	approximately 10 min	approximately 20 min	approximately 15 min	permanently sticky
Curing speed*	approximately 2 mm / 24 h	approximately 2 mm / 24 h	approximately 2 mm / 24 h
Coverage	depending on surface structure and a bead of 8 mm x 8 mm, approx. 10 m			8 mm beed approximately 6 m.
Building material class (DIN 4102-1)	B2
Building material class DIN EN 13501	E
Shelf life	up to 12 months, in a cool and dry place, in original packing	up to 12 months, in a cool and dry place, in original packing	up to 9 months, in a cool and dry place, in original packing	up to 24 months, in a cool and dry place, in original packing
Storage temperature	+5°C to +25°C	+5°C to +25°C	+5°C to +25°C	+5°C to +40°C
Especially suitable for	ISO-CONNECT OUTSIDE & INSIDE CX, OUTSIDE & INSIDE FD, OUTSIDE & INSIDE EPDM, VARIO SD & VARIO XD (fleece side); ISO-BLOCO ONE (corner bonding), 300 ja 600 (additional sealing)	ISO-CONNECT OUTSIDE & INSIDE CX, OUTSIDE & INSIDE FD, VARIO XD (fleece side), restricted REVEALSEAL	ISO-CONNECT OUTSIDE & INSIDE CX, OUTSIDE & INSIDE FD, Vario SD, Vario XD (fleece side)	ISO-CONNECT OUTSIDE & INSIDE CX, OUTSIDE & INSIDE FD, VARIO SD & VARIO XD, INSIDE EPDM perimeter area; ISO-BLOCO (corner bonding) ONE & RENO & ONE CONTROL

* Measured in accordance with DIN EN ISO 291 standard climate at 23 °C / 50% RH, values can vary through environmental factors (temperature, moisture, surface).
Processing
The application surface must be stable, firm, free of dust, cleaning agents, oil and fat. Fill out large surface voids in advance. Normal surface irregularities can be compensated for by adding sufficient adhesive. Porous surfaces can, if necessary, be pre-treated with ISO-TOP PRIMER. Apply bead of 8 to 10 mm on to the surface. Apply the foil, fleece, paperboard or paper without tension; meaning with a loop on to the freshly (no build up of skin) applied adhesive bead and press down lightly with appropriate tools. When installing window foil sealants apply sufficient ISO-TOP FLEX-ADHESIVE to assure that after the window foil has been pressed into place the width of the adhesive is at least 30 mm wide and at least 1 mm thick.		According to related standards (e.g. DIN 18540) elastic sealants should not be completely painted over, as tension and movement in the non-elastic paint may occur and could cause cracking. It is advisable to do a preliminary bonding and compatibility test on all surfaces.
		Work Safety
		Please refer to our EC safety data sheets for hazards, safety tips and storage, disposal and transportation markings.
Product Data Sheet