ISO-CONNECT KSKSEAL

Window installation, air permeability, vapour diffusion resistance, thermal insulation, sound reduction, passive house, energy efficient, cost efficient, mounting, Ψ-value, membrane, bitumen compatible

PRODUCT DESCRIPTION

PRODUCT ADVANTAGES

ISO-CONNECT KSKSEAL is an all-over self-adhesive, flexible sealing membrane made of polymer-modified bitumen with a flexible yet tearproof HDPE foil and is used for the external sealing of window and door elements in facade constructions. ISO-CONNECT KSKSEAL protects components in contact with the ground permanently against non-pressurised water as per DIN 18533 for sealing thresholds, ground moisture (capillary and retained water) and non-accumulating seepage water.

can be installed all year round
no hard-drying necessary
immediately resistant to water and driving rain
no waiting times
flexible, resilient and crack-covering
highly resistant to all aggressive substances which naturally occur in soil
perforated release paper for easier fitting
10 year performance guarantee*

* On the conditions of the manufacturer (available upon request).

APPLICATION

DIMENSIONS

ISO-CONNECT KSKSEAL has been designed for the correct physical external sealing of bottom joints on doors and floorlength windows to the perimeter area. The transition to further bituminous sealing in the perimeter area is thus possible conforming to material requirements.

width: 100, 150, 200, 250, 300, 350 mm further widths and thicknesses available on request

FINISHES

PACKAGING

Completely self-adhesive with separate release paper:

100 – 200 mm width with a longitudinal perforation
250 – 300 mm width with two longitudinal perforations
350 mm width with three longitudinal perforations

rolls, roll length: 20 m

Technical data	Standard	Classification
Material description		polymer-modified bitumen on tear-resistant HDPE
Colour		black
Building material class	DIN EN 13501	E
Bitumen compatible	DIN 7864 T1	bitumen compatible
UV light stability		approximately 5 months
Water vapour diffusion resistance µ		168500 / sd-value 252 m
Material thickness		1,5 mm
Handling temperature		-5°C to +30°C
Dimension tolerance	DIN 7715 T5 P3	DIN EN 1848-1 fulfilled
Storage temperature		+5°C to +30°C stored in a verical position
Shelf life		12 months

PREPARATION		Installation example: ISO-CONNECT KSKSEAL
Unroll the ISO-CONNECT KSKSEAL sealing foil and cut it to the required length. The area to be bonded must be clean, dry, free of solvents, greases, dust, oil and other anti-adhesive substances.
PROCESSING
Where necessary treat the area to be bonded with ISO-TOP KSKSEAL PRIMER and then apply the self-adhesive backing to the area to be bonded / sealed and press into place carefully using a roller so that the product is moulded to the contours of the substrate. On the top edge of the seal a flashing strip (ISO-BUTYL FLEECE TAPE) may be required. Additional mechanical fixing, e.g. supporting lath, clamping bar and fastening to the window, should, as specified in DIN 18531 and DIN 18533, be mounted.

Product Data Sheet