Window sill connection profile

PRODUCT DESCRIPTION

PRODUCT ADVANTAGES

The SILL CONNECTION PROFILE made of EPS-F offers the best possible heat and moisture protection. It enables technically and visually clean installation/attachment of the exterior and interior window sill that is individually adapted to the installed window or door elements – including optimal thermal separation.

The SILL CONNECTION PROFILE is narrow than the window frame, so it is possible to optimally position the inner or outer window sill. Those profiles can be produced at heights of 30 to 80 mm. A tongue and groove connection allows unlimited extension here and the excellent compressive strength of 1,26 kg/dm² means that the profiles can also be used for large and very wide window elements without any problems.

• Guarantees high thermal insulation
• The negative influences of hollow profiles have been eliminated
• Reduction of the thermal bridge
• Secure load transfer, even with high element weights
• Secured screw connection of the aluminium window sill
• Reduction of service required for window adjustment
• Suitable for all plastic and/or aluminium windows due to individual cutting
• Area of application in new and old buildings

AREA OF APPLICATION

The profile-specific SILL CONNECTION PROFILES for plastic, wood or aluminium windows are available in various shapes and heights. Those may be used for installation in the reveal and in front of the wall. Those are suitable for stone and aluminium window sills due to the overall height of 35 and 40 mm.

LENGTH ADJUSTMENT AND SEALING

Tongue and groove connection allow to use SILL CONNECTION PROFILE with unlimited length.
Seal between the window frame and the SILL CONNECTION PROFILE with Hybrid Polymer Crystal and fasten to the window frame with a drilling screw 4,8x50mm (standard DIN 7504).

To screw onto the window sill, we recommend a window sill screw with pressed-on washer in A2 4.5 x 35 mm.

To fit the window frame equipped with SILL CONNECTION PROFILE into the frame aperture apply a trace of Hybrid Polymer Power Fix to the lower installation frame profile as a sealant. Lift the window on to the position and fix mechanically.