ISO-CONNECT OUTSIDE FD
Product description |
Product advantages |
||
|
ISO-CONNECT OUTSIDE FD is an extremely flexible and stretchable special foil for external weather sealing and thus an impermeable to driving rain sealant on windows, doors and panel connecting joints. It consists of a flexible soft synthetic fleece, which is equipped with a swith a self adhesive strip on one edge for an easy and effective application on window frames. The vapour diffusion permeable fleece foil allows humidity to escape externally and corresponds to the requirements of the energy saving regulation (EnEV) as well as the RAL installation guidlines. |
|
||
Applications |
|||
Service |
|||
| ISO-CONNECT OUTSIDE FD is a component of the ISO³-WINDOW SEALING SYSTEM and is used on external construction connecting joints as a weather tight seal. The versatile special foil is very flexible in its application and is characterised through its low inherent rigidity, allowing a problem-free application around corners. Due to the extremely high elasticity of the material it is particularly suitable for the reliable sealing of movement joints. Even on extreme movements between elements the flexible widow connecting foil allows for a high degree of movement and at the same time high ultimate tensile strength. |
|
| Technical data | Standard | Classification |
| Material description | vapour diffusion permeable synthetic fleece | |
| Colour | white | |
| Weight | approximately 140 g/m² | |
| Impermeable to driving rain | DIN EN 1027 | ≥ 1050 Pa |
| Air permeability coefficient | DIN EN 12114 | a ≤ 0,1 m³/[h*m*(daPa)ⁿ] |
| UV light stability | approximately 3 months | |
| Temperature stability range | internal | -40°C to +80°C |
| sd-value | DIN EN ISO 12572 | approximately 0,05 m |
| Flexibility at -23°C | internal | no breaks, no tears |
| Fire behaviour | DIN 13501 | E |
| Dimension tolerance | DIN 7715 T5 P3 | requirements fulfilled |
| Shelf life | 1 year, dry and in original packing | |
| Storage temperature | +1°C to +20°C |
Application |
Finishes |
|
| The bonding surfaces must be firm, clean from dust, stripping agents, solvents, oil and grease. When sealing window, panel and door frame connections remove backing from the self-adhesive strip, then lay the foil into position and press firmly. ISO-CONNECT OUTSIDE FD can be applied in the factory or workshop. For the wall applications ISO-TOP FLEX-ADHESIVE SP or SP+ is used. Normal rough, e.g. uneven wall surfaces, can be compensated for through the application of a sufficient amount of adhesive. Use sufficient adhesive so that after applying the foil the adhesive caterpillar is at least 30 mm wide and 1 mm thick. On areas that are to be plastered over a continuous „Z“ shaped caterpillar should be applied over the area. Overlapping of the foil ends should only be up to 50 mm wide using thesame technique. Plastering can be done as soon as the adhesive bond is enough to carry the plaster. |
Finish SK: single side self-adhesive with 1 self-adhesive strip. Finish COMPLETE: full surface adhesive finish with a 2-way or 3-way split liner. Finish COMPLETE DUO: full surface adhesive finish with a 2-way or 3-way split liner and 1 self-adhesive strip (window mounting). Special finishes available on request. |
|
Dimensions |
||
|
width finish SK: 70, 90, 145, 180, 235, 290 mm width finish COMPLETE: 70, 100, 140, 200 mm width finish COMPLETE DUO: 70, 100, 140 mm |
||
Packaging |
||
| Rolls, roll length: 30 m. | ||
 |
 |
|
| Product Data Sheet |