| Material | Resysta | |
| Homogenous extrusion | ||
| Raw materials used | ||
| Raw materials used | Rice husks | approx 60% |
| Common salt | approx. 22% | |
| Mineral oil | approx. 18% | |
| Material Characteristics | ||
| Density | ASTM D2395:2002 | approx. 1.46 g/cm³ |
| Coeffivient of linear | ASTM D696 | 3,6 x 10(-5) mC |
| Water Absorption & Humidity | ASTM D1037:2006a | Little up to no water absorption (only surface moistening) |
| Weathering and UV Resistance | QUV Test | With glaze treatment, Resysta surfaces are extremely resistant |
| Slippery Test (wet area barefoot) | DIN 51097 | Class C (highest class) |
| Fire Rating (german/european norm) | EN ISO 11925-2 | B2 (E) – standard flammable (with additional treatment B1 reachable) |
| Fire rating according NFPA (US Norm) | ASTM E84 | Class A (flame propagation 25, smoke emission 450) |
| Fire rating (British standard) | BS 476 Teil 6&7 | Class 1 |
| Duraility Resistance against wood-destroying fungi (basidiomycetes) | DIN V EN V 12038:2002 | The material has not been affected, |
| highest durability | ||
| – Class 1 | ||
| Emission | LGA-tested safety & contamination | LGA test passed |
| Brinell hardness (HB) | EN 1534 | 81,1 N/mm2 |
| Coefficient of sliding and friction μ untreated | EN 13893 | 0,46 |
| Coefficient of sliding and friction μ with 2K varnish | EN 13894 | 0,52 |
| Axial Witdrawal Force (of Screws) | EN 320.2011-07 | 5777 N |
| Thermal Conductivity (λ) | EN 12664 | 0.199 W/(mK) |
| Water Vapour Transmission | DIN EN ISO 12572 | μ=1300 -> sd 7,22 m |
| Bending Strength | ISO 178 | 46 N/mm² |
| Bending Modulus | ISO 178 | 3850 N/mm² |
| Tensile Strength | ISO 527 | 21,8 N/mm² |
| Tensile Modulus | ISO 527 | 2340 N/mm² |
| Shearing Strength | EN 392 | 16,8 N/mm² |
| Durability – Resistance against rotting fungi | CEN/TS 15083-2 | No attack by the test fungi, highest durability class 1 (very durable) |
| Durability against mold fungi and wood discoloring fungi | EN 15534-1:2012 | Durability against the wood discoloring fungi (very durable) |
| Durability against subterranean Termites | ASTM D3345-08 | High Durability against subterranean Termites – nearly no weight loss |
| Specific surface and volume resistances | DIN IEC 60093 measuring voltage 100 V | Surface resistance Rx=8,0*10(13) Ω |
| Specific surface resistance α=8,1*10(14) Ω | ||
| Volume resistance Rx=2,2*10(13) Ω | ||
| Specific volume resistanceα=6,3*10(14) Ω | ||
| Processing | ||
| Material processing | Like wood with wood processing machines: Cutting, milling, drilling, sanding, gluing and screwing | |
| Surface treatment | Applying original Resysta stain and 2K sealer with brush | |