PRODUCT DESCRIPTION
The EiSYS-H façade/adjusting screw is an adjustable screw for fastening a support structure to a ventilated façade. For soft and pressure-resistant insulation materials with a lathe bar structure made of wood, aluminium or a slate surface as façade cladding.
The EiSYS-H screw may be fastened to the substructures: e.g. wooden beam/timber frame, KS stone, concrete and masonry.
The freely rotating second threaded sleeve at the top of the screw allows for the adjustment of the spacing between the anchor base and the counter batten.
PRODUCT ADVANTAGES
- Compared with timber construction reduced assembly time
- Can be mounted on various surfaces
- The conductivity of austenitic high-grade steels is much lower than steel or aluminium
- Insulation thickness of 60 – 300 mm possible
- Distance between counter batten and anchor base is easily adjustable
- Suitable for new buildings and renovations
- Full design freedom is maintained for the façade
APPLICATIONS
- For façade fastenings where wooden sub-structures are to be fixed on concrete or masonry at a distance
- Outdoors: rear-ventilated curtain façade with façade insulation
- About use follow the instruction on the product data sheet and local building regulations
Material
- Austenitic high-grade stainless steel A4 and Aluminium (The adjusting sleeve is made of aluminium)
- Very low conductivity (15 W/mK)
- Suitable for service classes 1 and 2 according to DIN EN 1995 Eurocode 5
- High corrosion resistance
- Good resistance to mechanical stress
- Not to be used for counter battens from tannin-rich wood
| Article number | PRODUCT DESCRIPTION | Dimensions Ø x L (mm) | Thread length | Diameter adjustment sleeve | Packing unit (pcs) |
| 946080 | Eisys-H kruvi 7,0×198 mm | 7,0 x 198 | 50 mm | 18,5 mm | 50 |
| 946081 | Eisys- H kruvi 7,0×218 mm | 7,0 x 218 | 50 mm | 18,5 mm | 50 |
| 946082 | Eisys-H kruvi 7,0×238 mm | 7,0 x 238 | 50 mm | 18,5 mm | 50 |
| 946083 | Eisys- H kruvi 7,0×258 mm | 7,0 x 258 | 50 mm | 18,5 mm | 50 |
| 946084 | Eisys-H kruvi 7,0×278 mm | 7,0 x 278 | 50 mm | 18,5 mm | 50 |
| 946085 | Eisys- H kruvi 7,0×298 mm | 7,0 x 298 | 50 mm | 18,5 mm | 50 |
| 946086 | Eisys-H kruvi 7,0×318 mm | 7,0 x 318 | 50 mm | 18,5 mm | 50 |
| 946087 | Eisys- H kruvi 7,0×338 mm | 7,0 x 338 | 50 mm | 18,5 mm | 50 |
| 946088 | Eisys-H kruvi 7,0×358 mm | 7,0 x 358 | 50 mm | 18,5 mm | 50 |
| 946089 | Eisys- H kruvi 7,0×378 mm | 7,0 x 378 | 50 mm | 18,5 mm | 50 |
| 946090 | Eisys-H kruvi 7,0×398 mm | 7,0 x 398 | 50 mm | 18,5 mm | 50 |
| 946091 | Eisys- H kruvi 7,0×418 mm | 7,0 x 418 | 50 mm | 18,5 mm | 50 |
| 946092 | Eisys-H kruvi 7,0×438 mm | 7,0 x 438 | 50 mm | 18,5 mm | 50 |
Details and information presented in this document are based on the best knowledge available at the time. They are intended for general information purposes, and it is recommended that users conduct their own tests under their specific conditions to ensure the product’s suitability for its intended use. No definitive guarantee or liability can be given regarding the details or the absolute completeness of the information provided in these guidelines. We reserve the right to improve or modify technical specifications and information without prior notice.