PRODUCT DESCRIPTION
ISO-TOP FLEX-ADHESIVES are high quality sealants and adhesives, with a wide adhesive spectrum.
Applications
They are suitable, in accordance to DIN 4108-7, for a reliable, air-impermeable bonding on window connect- ions foils. ISO-TOP FLEX-ADHESIVES are specially designed reliable bonding agents for window connections foils, fleece and paper in building constructions, providing an air-impermeable connection to masonry work.
Service
- Standard sizes available from stock
- Competent technical support available in the field and by phone
PRODUCT ADVANTAGES
- ISO-TOP FLEX-ADHESIVES are suitable for air- impermeable connections in accordance with the application examples of DIN 4108-7
- Makes an air-impermeable connection between foil and building structures (masonry work, concrete, stone, plaster and anodised aluminium) possible
- Very good bond to all commercial window connection foils
- Air-impermeable finish on openings
- DIN standardised quality and regulatory controls from external institutions
Packaging
- ISO-TOP FLEX-ADHESIVE SP: carton of 12 tubes (600 ml)
- ISO-TOP FLEX-ADHESIVE SP+: carton of 20 tubes (600 ml)
- ISO-TOP FLEX-ADHESIVE XP: carton of 12 tubes (600 ml)
- ISO-TOP FLEX-ADHESIVE PA: carton of 12 tubes (600 ml)
| Technical data | ||||
| ISO-TOP FLEX-ADHESIVE | XP | SP | SP+ | PA |
| Material description | soft elastic special polymer | |||
| Colour | black | white | grey | light blue |
| Base | MS polymer, solvent- and fungicide-free |
1-K-akrülaat dispersioon, lahusti ja fungitsiidi vaba |
modifitseeritud spetsiaalne polümeer, lahustiga, fungitsiidi vaba |
akrülaat dispersioon |
| Consistence | paste | |||
| Density | 1,5 g/ml | 1,7 g/ml | 1,4 g/ml | 1,2 g/ml |
| Handling temperature: ambient temperature bonding surface temperature |
+0°C to +40°C +0°C to +35°C |
+5°C to +40°C +5°C to +35°C |
5°C to +40°C -5°C to +40°C |
+5°C to +40°C +5°C to +40°C |
| Curing process | polymerisation through humidity at room temperature |
physical drying | absorption of humidity; at temperatures below +5 °C curing is delayed |
physical drying |
| Temperature stability | -40°C to +90°C | -20°C to +80°C | -30°C to +80°C | -40°C to +100°C |
| Skin forming | approximately 10 min | approximately 20 min | approximately 15 min | permanently sticky |
| Curing speed* * | ligikaudu 2 mm / 24 h | liapproximately 2 mm / 24 | approximately 2 mm / 24 h | |
| Coverage | depending on surface structure and a bead of 8 mm x 8 mm, approx. 10 m | 8 mm beed approximately 6 m. | ||
| Building material class (DIN 4102-1) | B2 | |||
| Building material class DIN EN 13501 | E | |||
| Shelf life | up to 12 months, in a cool and dry place, in original packing |
up to 12 months, in a cool and dry place, in original packing |
up to 9 months, in a cool and dry place, in original packing |
up to 24 months, in a cool and dry place, in original packing |
| Storage temperature | +5°C to +25°C | +5°C to +25°C | +5°C to +25°C | +5°C to +40°C |
| Especially suitable for | ISO-CONNECT OUTSIDE & INSIDE CX, OUTSIDE & INSIDE FD, OUTSIDE & INSIDE EPDM, VARIO SD & VARIO XD (fleece side); ISO-BLOCO ONE (corner bonding), 300 ja 600 (additional sealing) |
ISO-CONNECT OUTSIDE & INSIDE CX, OUTSIDE & INSIDE FD, VARIO XD (fleece side), REVEALSEAL |
ISO-CONNECT OUTSIDE & INSIDE CX, OUTSIDE & INSIDE FD, VARIO SD, VARIO XD (fleece side) |
ISO-CONNECT OUTSIDE & INSIDE CX, OUTSIDE & INSIDE FD, VARIO SD & VARIO XD, INSIDE EPDM perimeter area; ISO-BLOCO (corner bonding) ONE & RENO & ONE CONTROL |
| * Measured in accordance with DIN EN ISO 291 standard climate at 23 °C / 50% RH, values can vary through environmental factors (temperature, moisture, surface). |
Processing
The application surface must be stable, firm, free of dust, cleaning agents, oil and fat. Fill out large surface voids in advance. Normal surface irregularities can be compensated for by adding sufficient adhesive.
Porous surfaces can, if necessary, be pre-treated with ISO-TOP PRIMER. Apply bead of 8 to 10 mm on to the surface. Apply the foil, fleece, paperboard or paper without tension; meaning with a loop on to the freshly (no build up of skin) applied adhesive bead and press down lightly with appropriate tools.
When installing window foil sealants apply sufficient ISO-TOP FLEX-ADHESIVE to assure that after the window foil has been pressed into place the width of the adhesive is at least 30 mm wide and at least 1 mm thick. According to related standards (e.g. DIN 18540) elastic sealants should not be completely painted over, as tension and movement in the non-elastic paint may occur and could cause cracking.
It is advisable to do a preliminary bonding and compatibility test on all surfaces.
When joining the tapes, allow a 20 cm overlap. The ISO-CONNECT HB tape must extend 1 – 2 cm beyond both edges to prevent potential moisture penetration on both sides of the wall. The overlaps can be bonded using ISO-TOP FLEX-ADHESIVE XP adhesive.
Work Safety
Please refer to our EC safety data sheets for hazards, safety tips and storage, disposal and transportation markings.
Details and information presented in this document are based on the best knowledge available at the time. They are intended for general information purposes, and it is recommended that users conduct their own tests under their specific conditions to ensure the product’s suitability for its intended use. No definitive guarantee or liability can be given regarding the details or the absolute completeness of the information provided in these guidelines. We reserve the right to improve or modify technical specifications and information without prior notice.